Ploughs

Overum-logo.png
Överum CX series
Överum CX series

Reversible fully mounted plough with hydraulic operated working width. Överum Vari Flex CX is a series of fully mounted reversible ploughs in the medium range, for tractors up to 160 hp. The range consists of three, four or five furrow ploughs.

press to zoom
Överum CVL/DVL series
Överum CVL/DVL series

Reversible semi mounted plough. CVL is with 4-7 furrow, DVL from 5-8 furrows. Non-stop hydraulic stone release or fixed beam shear bolt version. Both models have robust frames with high ground clearance. Narrow transport width, a low centre of gravity and good weight distribution enable quick and safe transport without compromising steering ability on rough surfaces.

press to zoom
Akpil logo
Magna series
Magna series

Reversible semi-mounted plough with hydraulic or bolt protection. Available with between 5 and 8 bodies with plough body spacing of 105 cm. The ploughs from this series are equipped with 160x160x10 mm main beam, ready to work in the toughest conditions. The ploughs can be equipped with different types of mouldboards.

press to zoom
HP XL series
HP XL series

Reversible mounted plough with hydraulic protection. Available with between 4 and 6 bodies with plough body spacing of 105 cm. The ploughs from this series are equipped with 160x160x10 mm main beam, ready to work in the toughest conditions. The ploughs can be equipped with different types of mouldboards.

press to zoom
KM 180 series
KM 180 series

Reversible mounted plough with bolt protection. Available with between 4 and 6 bodies with plough body spacing of 95 or 105 cm. The ploughs from this series are equipped with 120x120x10 mm main beam, ready to work in the toughest conditions. The ploughs can be equipped with different types of mouldboards.

press to zoom
KM 80 series
KM 80 series

Reversible mounted plough with bolt protection. Available with between 4 and 6 bodies with plough body spacing of 85 or 105 cm. The ploughs from this series are equipped with 120x120x8 mm main beam, ready to work in the toughest conditions. The ploughs can be equipped with different types of mouldboards.

press to zoom

Subsoilers

Arbos-logo---200-px.png
Arbos ROCK M2
Arbos ROCK M2

The ARBOS ripper of the ROCK series has been designed and constructed to meet all user needs on particularly firm terrain and where crop residue is present. The high resistant steel used and the particular structure with bolted joints make the ROCK ripper suitable for heavy-duty working conditions. Each anchor is equipped with a bolted safety device duly sized and a quickrelease tip. It can also be equipped with deflectors to break up the terrain better.

press to zoom

Överum ploughs

Akpil Magna 8 Vario

Arbos ROCK M2 subsoiler